Arduino IDE starter kit med blant annet LED-ring, IR og andre sensorer – NodeMCU/ESP8266

Beskrivelse

I boksen følger det med NodeMCU som støtter Arduino IDE, samt LED ring, sensorer som, PIR, lyd, lys, IR/infrarød, fjerkontroll osv. Se bilder og videre tekst.

• LED Ring for Arduino Kits: ESP8266 obtains data from Internet and 3 sensors,controls the LED Ring to change different colors and displays in different modes.Mobile phone or infrared controller can remotely control ESP8266 to switch different functions: FlashLight, Analog Clock, Music Reactive, Warning Light, Sound/ Light Reactive, Human Detection LED.Program developed with Arduino IDE
• ️️️【LED Ring】IC WS2812B control trichromatic color of 24 LED RGB pixel can realize 256 highlighted, complete 16777216 colors of all true color display.Single-wire communication.Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC. Compatible with Adafruit NeoPixels LEDs.Works great with Arduino, Raspberry Pi,etc.
• ️️️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform compatible for Arduino.【IR Controller】:Consists of infrared remote control and 38KHz infrared receiver module.NOT INCLUDE «CR2025 BATTERY»!with 20 function keys.Transmit distances <8 meters.Effective Angle: 60°.【Light Sensor】Can detect the brightness and the ambient light intensity.Adjustable sensitivity.3.3V-5V Voltage.DO digital switching 0/1 outputs and AO analog voltage output
• 【HC-SR501】:When someone approach human infrared PIR body sensor,output range High,when people leave,output Low.Not repeat/repeatable 2 trigger mode.Sensitivity and Time Delay is adjustable.Sensing Angle <100°.【Sound Sensor】: built-in capacitive electret microphone.can identify presence or absence of sound.When sound intensity exceed a certain threshold, output low signal light Off, Otherwise output High light On.Turn the spin button on the sensor board adjust the sensitivity.

Important:
⭐Kits designed for Arduino IDE
⭐All components have been soldered
⭐IR controller not contain CR2025 battery

Features:
FlashLight: LED Ring lights up like flashlight.Light intensity and 256x256x256 colors can be adjusted
Warning Light: Simulate warning light.emits blue and red light alternately in loop.Time interval frequency adjustable
Music Reactive: LED Ring «hears» the high or low beats of the music,dynamically turn on/off the number of LED lights.LED Strip Light will «dance» to the rhythm and emit lights of different colors randomly
Analog Clock: LED Ring uses ESP8266 to obtain local real-time on the Internet(Can adjust to your location).And hour and minute hands are displayed on the LED «Clock Dial»
Sound Reactive: When LED ring «hear» a certain intensity of sound,emit different colors light
Light Reactive: When LED ring «see» a certain intensity of light,emit different colors light
Human Detection: When LED ring «detects» someone approaching, it can emit light of different colors.person leaves,light turns off

Package List:
1x 24 Bit RGB WS2812B LED Ring
1x ESP8266-12E
1x HC-SR501 Infrared IR Sensor
1x Sound Sesnsor
1x Light Sensor
1x USB Cable
1x IR Receiver,Controller(NO Battery)
10x Female to Male Dupont Cable
10x Female to Female Dupont Cable